SANY SAG200C-6 200hp Hydraulic Motor Grader
Feature
Rated power : 164/2200kW/RPM
Max.torque : 949Nm
Rated power : 164/2200kW/RPM
Max.torque : 949Nm
 |
SANY Heavy Industry Co.,Ltd. |
|---|
Name : SANY
Service Tel : 0086-731-85835199
E-mail : sales31@sanygroup.cn
Web Site : http://www.sanyglobal.com/
Address : SANY Industrial Park, Economic and Technological Development Zone, Changsha, Hunan,China
Sany SAG200C-6 motor grader features the hydraulic drive, stepless speed change, and simplified operation. The 200hp hydraulic motor grader with German Bosch fuel injection leads to low exhaust emissions.
Composite transmission, Intelligence and high efficiency, Heavy load and reliability
Integrated with the mechanical and hydraulic transmission features wide speeds, high power shift efficiency and powerful working ability.
Self-adaptive load control and steering technology eliminates frequent gear shifting and ensures high working efficiency.
Reliable and durable Meritor rear axles feature imported bearings and extra rigid drive chain.
The high torque, overload protected circle drive motor and gearbox allow precise positioning of the moldboard and blade.
High precision circle bearing is maintenance free.
Self-diagnosis function, centralized electrical components and filters are among the operator and service friendly features.
| Supplier | Dongfeng Cummins |
| Emission standard | Euro Ⅲ |
| Model | QSB6.7-C220 |
| Rated power | 164 kW |
| Rated rotation speed | 2200 rpm |
| Peak torque | 949 Nm |
| Typical: L*W*H | 8850×2620×3260 mm |
| Standard (with front counterweight): L*W*H | 9000×2620×3260 mm |
| With front bulldozing plate: L*W*H | 9880×2740×3260 mm |
| With front counterweight and rear scarifier: L*W*H | 10010×2740×3260 mm |
| With front bulldozing plate and rear scarifier: L*W*H | 11100×2620×3260 mm |
| Front and rear axle base | 6279 mm |
| Middle and rear wheel base | 1538 mm |
| Clearance from rear axle to ground | 400 mm |
| Weight of typical type | 15200 Kg |
| Standard (with front counterweight) | 16000 Kg |
| With front counterweight and rear scarifier | 17400 Kg |
| With front bulldozing plate | 16520 Kg |
| Max. total weight (with front bulldozing plate and rear scarifier) | 17920 Kg |
| Max.traction | 98 KN |
| Length of blade | 3660 mm（12ft）standard configuration |
| Height of blade | 620 mm |
| Tilt angle | ±90° |
| Turning angle | 360 ° |
| Gears | 10 forward and 10 reverse |
| Forward speed | operating mode：3/5/7/9/13; travelling mode：6/10/16/28/38 |
| Reverse speed | operating mode：3/5/7/9/13; travelling mode：6/10/16/28/38 |
| Steering angle of front wheel | ±50° |
| Tilt angle of front wheel | ±17° |
| Articulated steering angle | ±24° |
| Oscillation angle of front axle | ±16° |
| Min. turning radius | 7.4° |
| Model of tire | 17.5-25（12PR) standard configuration |
| Max. capacity of hydraulic oil tank | 210L |
| Max. capacity of fuel tank | 310 L |
