SANY STG160C-6 160hp Hydraulic Motor Grader
Feature
Rated power : 119/2200kW/RPM
Max.torque : 624N.m
Rated power : 119/2200kW/RPM
Max.torque : 624N.m
 |
SANY Heavy Industry Co.,Ltd. |
|---|
Name : SANY
Service Tel : 0086-731-85835199
E-mail : sales31@sanygroup.cn
Web Site : http://www.sanyglobal.com/
Address : SANY Industrial Park, Economic and Technological Development Zone, Changsha, Hunan,China
Sany STG160C-6 motor grader is featured by the hydraulic drive, stepless speed change, and simplified operation. The 160hp motor grader with German Bosch fuel injection leads to low exhaust emissions.
The reliable, ZF "Tiptronic" transmission contributes to operator comfort.
Reliable and durable Meritor rear axles feature imported bearings and extra rigid drive chain.
The high torque, overload protected circle drive motor and gearbox allow precise positioning of the moldboard and blade.
High precision circle bearing is maintenance free.
Ground level refueling point and centralized electrical component locations are among the operator and service friendly features.
| Supplier | Dongfeng Cummins |
| Emission standard | Euro Ⅲ |
| Model | QSB4.5-C160 |
| Rated power | 119 kW |
| Rated rotation speed | 2200 rpm |
| Peak torque | 624 Nm |
| Typical: L*W*H | 8650×2620×3260 mm |
| Standard (with front counterweight): L*W*H | 9000×2620×3260 mm |
| With front counterweight and rear scarifier: L*W*H | 10050×2620×3260 mm |
| With front bulldozing plate and rear scarifier: L*W*H | 10900×2620×3260 mm |
| Front and rear axle base | 6300 mm |
| Middle and rear wheel base | 1538 mm |
| Clearance from rear axle to ground | 400 mm |
| Weight of typical type | 14200 Kg |
| Standard (with front counterweight) | 15000 Kg |
| With front counterweight and rear scarifier | 16220 Kg |
| With front bulldozing plate | 15150 Kg |
| Max. total weight (with front bulldozing plate and rear scarifier) | 16250 Kg |
| Max.traction | 89 KN |
| Length of blade | 3660（12ft）mm standard configuration |
| Height of blade | 620 mm |
| Tilt angle | ±90° |
| Turning angle | 360 ° |
| Gears | 6 forward and 3 reverse |
| Forward speed | 5/9/11/18/26/41 km/h |
| Reverse speed | 5/11/26 km/h |
| Steering angle of front wheel | ±50° |
| Tilt angle of front wheel | ±17° |
| Articulated steering angle | ±24° |
| Oscillation angle of front axle | ±16° |
| Min. turning radius | 7.3 m |
| Model of tire | 17.5-25（12PR) standard configuration |
| Max. capacity of hydraulic oil tank | 140 L |
| Max. capacity of fuel tank | 350 L |
