SANY SW405K 5 ton Wheel Loader
Feature
Operating Weight : 5000kg
Rated power : 195/1800kW/rpm
Operating Weight : 5000kg
Rated power : 195/1800kW/rpm
 |
SANY Heavy Industry Co.,Ltd. |
|---|
Name : SANY
Service Tel : 0086-731-85835199
E-mail : sales31@sanygroup.cn
Web Site : http://www.sanyglobal.com/
Address : SANY Industrial Park, Economic and Technological Development Zone, Changsha, Hunan,China
Customized DANA transmission:
The DANA axis-shift transmission with electronic control system is used for automatic shifting, maximum efficiency and 10k-hour service life.
F/R handle and fingertips control realize ease of switch between left and right hands.
Solenoid valve + logic control achieve a much smoother shifting and faster response.
High-pressure load-sensitive hydraulic system:
Perfect match between speed and power, 10%-15% energy saving.
The 25MPa high-pressure hydraulic system and main valve of large displacement achieves higher breakout and lifting force.
Reinforced structural components:
For heavy-duty mining applications with a service life reaching 10k hours.
| Model | DEUTZ TCD7.8L6 |
| Power | 170/1800 kW/rpm |
| Torque | 962 ft lbs/1304Nm/1450rpm |
| No. of cyliners | 6 |
| Displacement | 7.8L |
| Bore x Stroke | 110mm x 136mm |
| Hydraulic System Type | Load sensing hydraulic system |
| Pump | Implement - Kawasaki Steering - Eaton/Danfoss |
| Max. flow | 81 GPM / 132L/min @ 2200rpm |
| System pressure | 3916 PSI / 27MPa |
| Cycle time | 10.6 s |
| Gear-shift model | Automatic, Manual, KD |
| Travel speed | forward 4.4/8/16/25 mph, reverse 4.4/8/16 mph |
| Service brakes | Wet Disk |
| Parking brake | SAHR Disk Brake |
| Height to axle centerline | 440mm |
| Centerline of rear axle to edge of counterweight | 2330mm |
| Wheelbase | 3200mm |
| Centerline of rear axle to hitch | 1600mm |
| Shipping length | 6862/8142mm |
| Max. dump height | 5441mm |
| Hinge pin height at max.lift | 4133mm |
| Dump clearance at max.lift | 3118mm |
| The lowest dump to the ground | 56mm |
| Reach at max.lift and 45° discharge | 1140mm |
| Rack back at max.lift | 58° |
| Dump angle at max.lift | 45° |
| Rack back at carry height | 51° |
| Rack back at ground | 45° |
| Tail angle to the rear wheel | 27° |
| Clearance circle to outside of tires | 5800mm |
| Clearance circle to counterweight | 5911mm |
| Max.circle | 6456mm |
| Bucket width | 2975mm |
