SANY SPS30000/SINOTRUCK chassis 12 Ton Stiff Boom Crane Truck Mounted Crane
Feature
Max. Lifting Capacity : 12t
Boom Length : 14.8m
Overall Weight : 37.5t
Max. Lifting Capacity : 12t
Boom Length : 14.8m
Overall Weight : 37.5t
 |
SANY Heavy Industry Co.,Ltd. |
|---|
Name : SANY
Service Tel : 0086-731-85835199
E-mail : sales31@sanygroup.cn
Web Site : http://www.sanyglobal.com/
Address : SANY Industrial Park, Economic and Technological Development Zone, Changsha, Hunan,China
Features
1: High tensile strength extension booms to optimize the lifting height and the working range
2: Best lift-to-weight ratio in the industry
3: The wide outrigger span ensures the best stability in all mounting situation
4: The standard package includes 2 working lights to ensure safe operation, day and night
5: Optionally available is an over-load protection system to ensure safe crane operation
6: Sany Palfinger produces according to European Quality Standards to ensure the best reliability, performance, and safety in the industry
7: Optimized for installation on 3 axle trucks
8: A safety Package is optionally available
| Max. lifting capacity | 12t |
| Overall length | 11963mm |
| Overall width | 2496mm |
| Overall height | 3997mm |
| Axles | 2 |
| Axle distance-1,2 | 5800 |
| Axle distance-2,3 | 1400 |
| Overall weight | 37500kg |
| Front axle load | 7500kg |
| Rear axle load | 30000kg |
| Model | WD615.87 |
| Rated power | 213Kw |
| Rated torque | 1160Nm at 1100~1600 rpm |
| Emission standard | Euro II |
| Max. traveling speed | 102km/h |
| Approach angle | 16° |
| Departure angle | 9° |
| Max. gradeability | 32% |
| Rated lifting moment | 30mt |
| Rated lifting capacity | 12000kg(2.5m) |
| Max.outreach | 14.5m |
| Max.lines of hook | 6 |
| Slewing angle(continuous) | continuous |
| Boom raising angle | 0~75° |
| Max.lifting height(the measurement from the ground after the outriggers fully extended) | 16.5m |
| Length of the basic boom | 5.4m |
| Length of fully extended boom | 14.8m |
| Boom sections | 4 |
| Outrigger span (fully extended) | 6.0m |
| Recommended volum for the system | 70L/min |
| Operating pressure | 26/28Mpa |
| Oil tank capacity | 200L |
| Crane moment (dynamic) | 507.3kNm (51.7mt) |
| Torsional moment (dynamic) | 30.0kNm (3.1mt) |
| HVAC in low cab | Cooling / Heating |
