SANY SYG5360THB 47 47m Truck-mounted Concrete Pump
Feature
Gross power(kW） : BENZ
Gross weight of machine(kg) : 47m
Gross power(kW） : BENZ
Gross weight of machine(kg) : 47m
 |
SANY Heavy Industry Co.,Ltd. |
|---|
Name : SANY
Service Tel : 0086-731-85835199
E-mail : sales31@sanygroup.cn
Web Site : http://www.sanyglobal.com/
Address : SANY Industrial Park, Economic and Technological Development Zone, Changsha, Hunan,China
Sany SYG5530THB 47 truck-mounted concrete pump has 47m vertical reach with the height limit programmed to prevent boom contact with an obstruction or overhead hazard. The 47m concrete pump provides the users reliable pumping performance along with the highly wear resistant parts including delivery pipe, discharge port, transition bushing, concrete piston, wear plate, cutting ring and delivery cylinder that improve the pumping efficiency and reduce down time.
One Button Stabilization Technology
The one button stabilization technology quickly dampens any boom movement resulting from repositioning the boom. This allows precise positioning of the end hose.
Boom Anti Vibration Technology
The boom anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.
Energy Saving Technology
With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.
Anti Overswing Technology
By adopting our new swing brake technology, the boom's overswing amplitude is reduced by 60%
Fault Self Diagnostic Technology
Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.
Smart Boom System
One Button Boom Extend/Retract
Press upward on the boom extend/retract button to extend the boom or press downward to retract the boom automatically.
Coordinated Section Operation
The boom can be rapidly and accurately repositioned by coordinating the movement the first and second sections
Safety Technology
Boom Overload Protection Technology
Relief valves are mounted on the boom cylinder counterbalance valves. These valves will release pressure in the event of excessive boom load to prevent damage to the boom.
Hopper Screen Interlock Technology
As an operator protection measure, the pump will automatically stop when the hopper screen is opened.
Hydraulic Oil Level Monitoring
The oil level in the hydraulic reservoir is continually monitored. If the level drops below a preset level, an alarm will sound and the pump will be stopped to prevent damage to the hydraulic system.
| Length | 12500 mm |
| Width | 2500 mm |
| Height | 4000 mm |
| Empty weight | 36400 kg |
| Vertical reach | 47 m |
| Horizontal reach | 42 m |
| Reach depth | 29.4 m |
| Unfolding reach | 13.9 m |
| 1st section-Length | 9760 mm |
| 1st section-Articulation | 89° |
| 2nd section-Length | 7670 mm |
| 2nd section-Articulation | 180° |
| 3rd section-Length | 7410 mm |
| 3rd section-Articulation | 180° |
| 4th section-Length | 9670 mm |
| 4th section-Articulation | 235° |
| 5th section-Length | 8545 mm |
| 5th section-Articulation | 215° |
| Rotation | ±360° |
| Outrigger spread L-R-Front | 9300 mm |
| Outrigger spread L-R-Rear | 9620 mm |
| Output (Low/High-pressure) | 170/120 m³/h |
| Pressure (Low/High-pressure) | 8.3/12 Mpa |
| Max. strokes per minute (Low/High-pressure) | 29/19 times/min |
| Delivery cylinder diameter | 260 mm |
| Stroke length | 1900 mm |
| Hydraulic system | Open |
| Hydraulic system pressure | 32 Mpa |
| Hydraulic tank capacity | 680 L |
| Water tank capacity | 620 L |
| Pipe size | 125 mm |
| End hose length | 3 m |
| End hose diameter | 125 mm |
| Chassis model | BENZ Actros 4141 |
| Engine model | OM501LA.Ⅳ/3 |
| Engine power | 300/1800 kW/rpm |
| Emissions | Tier Ⅳ / Tier III |
| Fuel tank capacity | 400 L |
| Displacement | 11.946 L |
| Max.speed | 80 km/h |
| Brake distance | ≤10/30 m/km/h |
