XCMG XR220DII Rotary Drilling Rig
Feature
Max. Pile Diameter :
Max. Pile Depth : 67m
Max. Output Torque : 220(KN.M)
Max. Pile Diameter :
Max. Pile Depth : 67m
Max. Output Torque : 220(KN.M)
 |
XCMG Group |
|---|
Name : XCMG
Service Tel : 86-516-87739271
E-mail : export@xcmg.com
Web Site : http://www.xcmg.com/en-us/
Address :
The machine adapt single row rope for main winch to figure out the wear of steel rope. and extend the life-span.
With infrared camera for observing main winch , Manipulator can observe the state of steel rope at day and night in cab.
Optional configuration according to cus tomers' requirement (Eg: support cylinder , automatic positioning of slewing , Crowd Winch tyro crowd winch CFA, hydraulic casing oscillator, DTH hammer ) Excellent expansibility.
Adopting the supercharged CUMMINS engine with European Ⅲ effluent standard. Meet environmental protection and energy conservation . Super power.
With the hydraulic pressure system adopted threshold power control and positive flow control, the system acquired high efficiency and higher energy conservation.
The patented parallelogram articulated structure actualizes a wider work range . The highly strengthened box-type steel structure design makes the mast of highly-rigidity and intensity , therefore the drill accuracy is heightened .
The machine has passed CE certification of TüV Rheinland group.
Standard centralized lubricating system, allowing easier maintenance.
| Project | Unit | Parameter |
|---|---|---|
| Max.Drilling Diameter | ||
| Uncased | (mm) | φ2000 |
| Cased | (mm) | φ1700 |
| Max.Drilling Depth | (m) | 67 |
| Dimension | ||
| Working condition L × W × H | (mm) | 10260×4400×22619 |
| Transportation condition L × W × H | (mm) | 16355×3500×3510 |
| Overall Drilling Weight | (t) | 70 |
| Engine | ||
| Model | - | CUMMINS QSL-325 |
| Rated Power | (kW) | 242/2100 |
| Hydraulic System | ||
| Working pressure | (MPa) | 35 |
| Rotary Drive | ||
| Max. output torque | (kN.m) | 220 |
| Rotary speed | (r/min) | 7~22 |
| Spin off speed | (r/min) | 90 |
| Pull-Down Cylinder | ||
| Max.pull-down piston push | (kN) | - |
| Max.pull-down piston pull | (kN) | - |
| Max.pull-down piston stroke | (mm) | - |
| Crowd Winch | ||
| Max.pull-down piston push | (kN) | 250 |
| Max.pull-down piston pull | (kN) | 250 |
| Max. pull-down piston stroke | (mm) | 15000 |
| Main Winch | ||
| Max.pulling force | (kN) | 230 |
| Max. single-rope speed | (m/min) | 70 |
| Diameter of the steel wire rope | (mm) | 30 |
| Auxiliary Winch | ||
| Max. Pulling force | (kN) | 80 |
| Max. single-rope speed | (m/min) | 60 |
| Diameter of the steel wire rope | (mm) | 20 |
| Drilling mast | ||
| Left/right inclination of mast | (°) | 42464 |
| Front inclination of mast | (°) | 5 |
| Rotary table slewing angle | (°) | 360 |
| Traveling | ||
| Max. traveling speed | (km/h) | 1.5 |
| Max.grade ability | (%) | 35 |
| Crawler | ||
| Track shoe width | (mm) | 800 |
| Distance between tracks | (mm) | 3250～4400 |
| The length of crawler | (mm) | 5715 |
| Average ground pressure | (kPa) | 90 |
