XCMG XR150DⅡ Rotary Drilling Rig
Feature
Max. Pile Diameter :
Max. Pile Depth : 55m
Max. Output Torque : 150(kN.m)
Max. Pile Diameter :
Max. Pile Depth : 55m
Max. Output Torque : 150(kN.m)
 |
XCMG Group |
|---|
Name : XCMG
Service Tel : 86-516-87739271
E-mail : export@xcmg.com
Web Site : http://www.xcmg.com/en-us/
Address :
Imported genuine Cummins turbo-supercharged engine, high power, reliable performance and unique speed droop design, saving more fuel.
Special telescopic rotary excavating undercarriage, equipped with double-box type derricking mechanism, easy for transportation and adjustment, enabling excelle nt operation stability and reliability.
Imported Kawasaki hydraulic components, reasonable power system matching and high construction efficiency.
Global satellite positioning system (GPS), allowing remote data analysis, real-time monitoring and fault diagnosis of complete machine.
Independent intellectual property intelligent control system, CAN bus and PLC control system application, including the mast verticality auto/manual adjustment, depth auto detection and display, intelligent fault diagnosis control etc.
| Project | Unit | Parameter |
|---|---|---|
| Max.Drilling Diameter | ||
| Uncased | (mm) | φ1500 |
| Cased | (mm) | - |
| Max.Drilling Depth | (m) | 55 |
| Dimension | ||
| Working condition L × W × H | (mm) | 7122×4100×18945 |
| Transportation condition L × W × H | (mm) | 13050×3100×3060 |
| Overall Drilling Weight | (t) | 47.5 |
| Engine | ||
| Model | - | CUMMINS B5.9-C |
| Rated Power | (kW) | 133/2000 |
| Hydraulic System | ||
| Working pressure | (MPa) | 32 |
| Rotary Drive | ||
| Max. output torque | (kN.m) | 150 |
| Rotary speed | (r/min) | 8~30 |
| Spin off speed | (r/min) | - |
| Pull-Down Cylinder | ||
| Max.pull-down piston push | (kN) | 120 |
| Max.pull-down piston pull | (kN) | 160 |
| Max.pull-down piston stroke | (mm) | 3500 |
| Crowd Winch | ||
| Max.pull-down piston push | (kN) | - |
| Max.pull-down piston pull | (kN) | - |
| Max. pull-down piston stroke | (mm) | - |
| Main Winch | ||
| Max.pulling force | (kN) | 155 |
| Max. single-rope speed | (m/min) | 75 |
| Diameter of the steel wire rope | (mm) | 28 |
| Auxiliary Winch | ||
| Max. Pulling force | (kN) | 50 |
| Max. single-rope speed | (m/min) | 70 |
| Diameter of the steel wire rope | (mm) | 16 |
| Drilling mast | ||
| Left/right inclination of mast | (°) | 42432 |
| Front inclination of mast | (°) | 5 |
| Rotary table slewing angle | (°) | 360 |
| Traveling | ||
| Max. traveling speed | (km/h) | 3.2 |
| Max.grade ability | (%) | 40 |
| Crawler | ||
| Track shoe width | (mm) | 700 |
| Distance between tracks | (mm) | 3100～4100 |
| The length of crawler | (mm) | 4323 |
| Average ground pressure | (kPa) | 72.3 |
