XCMG XR320D Rotary Drilling Rig
Feature
Max. Pile Diameter :
Max. Pile Depth : 90m
Max. Output Torque : 320(kN.m)
Max. Pile Diameter :
Max. Pile Depth : 90m
Max. Output Torque : 320(kN.m)
 |
XCMG Group |
|---|
Name : XCMG
Service Tel : 86-516-87739271
E-mail : export@xcmg.com
Web Site : http://www.xcmg.com/en-us/
Address :
It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability.
It adopts the luffing mechanism of large triangle form to ensure the stability of construction of big holes and deep piles in hard formation.
It adopts the front-located single-rope main wi nch structure to greatly prolong the service life of steel wire rope and lower the use cost.
It adopts the imported Cummins turbo-supercharged engine with three gears. Users can select corresponding gears according to different working conditions to achieve the effect of a drilling rig driven by three engines.
Normal mode and entering-rock mode of unit head are available for operation in soil and rock to improve the construction efficiency.
Winch-pressurized and sleeve-driven functions are available for selection to satisfy various needs of the users.
It is equipped with a centralized lubrication system as standard configuration to provide more convenient maintenance and make the machine a good reliability .
| Project | Unit | Parameter |
|---|---|---|
| Max.Drilling Diameter | ||
| Uncased | (mm) | φ2500 |
| Cased | (mm) | φ2200 |
| Max.Drilling Depth | (m) | 90 |
| Dimension | ||
| Working condition L × W × H | (mm) | 10480×4800×25155 |
| Transportation condition L × W × H | (mm) | 16550×3500×3500 |
| Overall Drilling Weight | (t) | 92.8 |
| Engine | ||
| Model | - | CUMMINS QSM11-C400 |
| Rated Power | (kW) | 298/2100 |
| Hydraulic System | ||
| Working pressure | (MPa) | 35 |
| Rotary Drive | ||
| Max. output torque | (kN.m) | 320 |
| Rotary speed | (r/min) | 5~20 |
| Spin off speed | (r/min) | - |
| Pull-Down Cylinder | ||
| Max.pull-down piston push | (kN) | 250 |
| Max.pull-down piston pull | (kN) | 250 |
| Max.pull-down piston stroke | (mm) | 6000 |
| Crowd Winch | ||
| Max.pull-down piston push | (kN) | 330 |
| Max.pull-down piston pull | (kN) | 350 |
| Max. pull-down piston stroke | (mm) | 16000 |
| Main Winch | ||
| Max.pulling force | (kN) | 280 |
| Max. single-rope speed | (m/min) | 75 |
| Diameter of the steel wire rope | (mm) | 36 |
| Auxiliary Winch | ||
| Max. Pulling force | (kN) | 100 |
| Max. single-rope speed | (m/min) | 65 |
| Diameter of the steel wire rope | (mm) | 20 |
| Drilling mast | ||
| Left/right inclination of mast | (°) | 42464 |
| Front inclination of mast | (°) | 5 |
| Rotary table slewing angle | (°) | 360 |
| Traveling | ||
| Max. traveling speed | (km/h) | 1.5 |
| Max.grade ability | (%) | 35 |
| Crawler | ||
| Track shoe width | (mm) | 800 |
| Distance between tracks | (mm) | 3500~4800 |
| The length of crawler | (mm) | 5052 |
| Average ground pressure | (kPa) | 115 |
