Dynapac CP2100 Pneumatic rollers
Feature
Operating Mass : 9840 kg
Static linear load : N/A
Compaction width : N/A
Operating Mass : 9840 kg
Static linear load : N/A
Compaction width : N/A
| Masses | |
| Operating mass (incl. ROPS) | 9840 kg |
|---|---|
| Mass with max. ballast | 21000 kg |
| Mass with wet sand ballast | 14150 kg |
| Traction | |
| Speed low | 9 km/h |
| Speed high | 23 km/h |
| Speed high (EEC countries) | 20 km/h |
| Compaction | |
| Rolling width | 1800 mm |
| Tyre overlap | 42 mm |
| Wheel loads, without ballast | 1350 kg |
| Wheel loads, with wet sand ballast | 2020 kg |
| Wheel loads, with max. ballast | 3000 kg |
| Tyre pressure, min | 250 kPa |
| Tyre pressure, max | 850 kPa |
| Tyre type (smooth) | 13/80 R20 |
| Water spray system, type | Pressurized |
| Water spray system, tank capacity | 420 l |
| Water spray system, spray nozzle | one per tyre |
| Ballast volume | 3.38 m3 |
| Engine | |
| Manufacturer/Model | Cummins QSB 3.8 (Tier 4F) |
| Rated power, SAE J1995 | 89 kW (118 hp ) @ 2200 rpm |
| Type | Water cooled turbo Diesel |
| Fuel tank capacity | 210 l |
| Electrical system | 24V |
| Alternative Engine | |
| Manufacturer/Model | Cummins QSB 3.3 (Tier 3A) |
| Rated power, SAE J1995 | 74 kW (99 hp ) @ 2200 rpm |
| Hydraulic system | |
| Driving | Axial piston pump with variable displacement. Axial piston motors (2) with variable displacement. |
| Steering | Axial piston pump with variable displacement. |
| Service brake | 2 multidisc brakes on rear wheels activated by pedal. |
| Parking/ Emergency brake |
Failsafe multidisc brakes in both gear boxes. |
