Komatsu 980E-4 Mining Truck
Feature
Gross Power : 3,500 HP2610 kW
Max. Torque :
Displacement :
Gross Power : 3,500 HP2610 kW
Max. Torque :
Displacement :
 |
KOMATSU |
|---|
Name : KOMATSU
Service Tel : (8621)-6841-4567
E-mail :
Web Site : https://home.komatsu/en/
Address :
By using advanced computer-aided design, finite element analysis, and full-scale static and dynamic testing, the frame has been designed to carry 363 metric tons 400 short tons and provides the high structural reliability Komatsu is known for.
The 4476 kW 6,000 HP retarding system provides state of the art braking capacity for navigating today’s mining applications which contain steep continuous descents and sharp switchbacks. Continuous retarding capacity enhances the productivity of the vehicle operator, while eliminating the need for excessive mechanical braking effort.
The hydraulic system is a proven and reliable design with fewer parts than other OEMs. The system utilizes a single tank, providing one common source of fluid for steering, braking, and hoisting. In-line, replaceable filtration elements provide protection from hydraulic system contamination, making the system easier to service.
To keep downtime to a minimum, Komatsu developed a sub-frame pump module that can be removed and replaced as a single unit. This reduces change-out time and allows easy access to the hydraulic pump module.
As part of a complete service and support program, Komatsu equips every mining and quarry sized machine with Komtrax Plus®. By using a satellite-based communication system, Komtrax Plus® offers a new vision of monitoring your valuable assets. By providing insight to critical operating metrics the user can manage increased availability, lower ownership and operating costs and maximize fuel efficiency.
The information available through Komtrax Plus® allows service personnel to review faults and trends, improve the quality of the troubleshooting process and reduce unscheduled machine downtime.
Utilizing the required Body Worksheet (BW) process, Komatsu ensures that each body is designed to meet the requirements for each specific application while carrying its rated payload. Komatsu works with each customer to understand the material properties at a mine site and to identify the appropriate liner package.
Komatsu offers a standard all-welded steel, flat floor body with a full canopy and horizontal bolsters. This body includes a driver side eyebrow, body up sling, and rubber mounts on the frame.
■ Standard Body SAE Heaped 2:1: 250 m3 327 yd3
■ Standard Komatsu Body Weight: 41731 kg 92,000 lbs
| Make and model | Komatsu SSDA18V170 | |
| Fuel | Diesel | |
| Number of cylinders | 18 | |
| Operating cycle | 4 cycle | |
| Gross Horsepower* @ 1900 rpm | 2610 kW | 3,500 HP |
| Net flywheel power** @ 1900 rpm | 2495 kW | 3,346 HP |
| Weight (wet) | 11750 kg | 25,897 lbs |
| Weight (dry) | 11250 kg | 24,795 lbs |
| Optional: Tier 4 (TPEM) Engine Tier 4 (TPEM) Engine – Canada |
* Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer’s approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
** Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
| AC/DC CURRENT | ||
| Alternator | GTA-39 | |
| Dual Fan Main Blower | 340 m³/min | 12,000 cfm |
| Control | AC Torque Control System | |
| Motorized wheels* | GDY108-C Induction Traction Motors | |
| Ratio | 32.02:1 | |
| Speed (maximum) | 61 km/h | 38 mph |
* Drive system performance depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu must analyze each job condition to assure proper application
| Rock service, tubeless, radial tires | ||
| Standard tire* | 59/80 R63 | |
| Flange mount, five piece rim (rim assembly) | 1118 mm x 1600 mm x 140 mm | 44'' x 63'' x 5'' |
| Rims rated at 758 kPa 110 psi cold inflation pressure. | ||
| Typical total tire weight | 32585 kg | 71,838 lbs |
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc
Advanced Operator Environment with integral 4-post ROPS/ FOPS Level 2 structure (ISO 3449), adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering column, electric windshield wipers w/washer, tinted safety glass, power windows, Payload Meter IV, 55,000 Btu/hr heater and defroster, 21,600 Btu/hr air conditioning (HFC - 134A refrigerant)
Variable rate hydro-pneumatic with integral rebound control
| Max. front stroke | 303 mm | 11.92'' |
| Max. rear stroke | 239 mm | 9.40'' |
| Max. rear axle oscillation | ±6.5° |
Advanced technology, full butt-welded box sectional laddertype frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
| Plate material tensile strength steel | 482.6 mPa | 70,000 psi |
| Casting material tensile strength steel | 620.5 mPa | 90,000 psi |
| Rail width | 305 mm | 12'' |
| Rail depth (minimum) | 864 mm | 34'' |
| Top and bottom plate thickness | 45 mm | 1.77'' |
| Side plate thickness: | ||
| Rear | 25 mm | 0.98'' |
| Front | 32 mm | 1.26'' |
| Drive axle mounting | Pin and spherical bushing | |
| Drive axle alignment | Swing link between frame and axle |
All-welded steel flat floor body with horizontal bolsters and full canopy. Rubber mounts on frame, eyebrow and body up sling are standard. Extended canopy and pivot exhaust heating are optional.
| Floor sheet 1379 MPa / 200,000 psi tensile strength steel | ||
| Outer | 16 mm | 0.63'' |
| Center | 19 mm | 0.75'' |
| Front sheet 1379 MPa / 200,000 psi tensile strength steel | ||
| Outer | 10 mm | 0.39'' |
| Center | 12 mm | 0.47" |
| Side sheet 1379 MPa / 200,000 psi tensile strength steel | 10 mm | 0.39'' |
| Canopy sheet 690 MPa / 100,000 psi tensile strength steel | 6 mm | 0.24'' |
| SAE heaped 2:1 | 250 m³ | 327 yd³ |
| Standard Komatsu body weight | 41731 kg | 92,000 lb |
Service brakes: Oil-cooled, hydraulic actuated, multiple disc brakes at each wheel.
| Traction system | Wheel spin-slide control | |
| Max. service apply pressure | 18960 kPa | 2,750 psi |
| Total friction area per brake | 103729 cm² | 16,078 in² |
| Auto apply system | Automatically applied prior to hydraulic system pressure dropping below level required secondary stopping requirements. | |
| Secondary brake system | Complies with ISO-3450 Standards | |
| Wheel brake lock | Switch activated | |
| Parking brakes | Multiple disc, spring-applied, hydraulicallyreleased, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on ±15% grade at maximum gross vehicle weight. | |
| Electric dynamic retarder (max) - Continuous | 4476 kW | 6,000 hp |
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse propulsion.
Replaceable core radiator assembly, split-flow, with deaeratortype top tank
| Radiator frontal area | 7.02 m² | 75.5 ft² |
Steering: Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
| Turning circle diameter (SAE) | 32 m | 105' |
| Reservoir | 947 L | 250 U.S. gal |
| Filtration | In-line replaceable elements | |
| Suction | Single, full flow, 100 mesh | |
| Hoist and steering | Dual, in-line, high pressure | |
| Brake component cabinet | Above deck, easily accessible with diagnostic test connections | |
| Hoist | Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening | |
| Hoist times: | ||
| Power-up loaded | 21 sec | |
| Power-down (high idle) | 16 sec | |
| Float-down empty (low idle) | 17sec | |
| Pumps | Two pumps, single package, in-line | |
| Hoist and brake cooling | Tandem gear pump with output of 931 lpm 246 gpm at 1900 rpm and 18960 kPa 2,750 psi | |
| Steering and brake | Pressure-compensating piston pump with output of 246 lpm 65 gpm at 1900 rpm and 20685 kPa 3,000 psi | |
| System relief pressures: | ||
| Hoist and brake cooling | 17237 kPa | 2,500 psi |
| Steering and brake | 20685 kPa | 3,000 psi |
Ports available for powering disabled truck and for system diagnostics.
4 x 8D 1400 CCA, 12 volt, in series/parallel, 220 ampere-hour, bumper-mounted with disconnect switch & lock-out.
| Alternator | 24 volt, 250 amp | |
| Lighting | 24 volt | |
| Cranking motors | Two/24 volt |
| Cooling System | 719 L | 190 U.S. gal |
| Crankcase | 341 L | 90 U.S. gal |
| Hydraulic system | 1325 L | 350 U.S. gal |
| Motor gear box (each) | 95 L | 25 U.S. gal |
| Fuel tank | 5300 L | 1,400 U.S. gal |
