Cat Medium Excavators 325F L (2017)
Feature
Operating weight : 25900.0 kg
Engine Power : 120.0 kW
Operating weight : 25900.0 kg
Engine Power : 120.0 kW
 |
|---|
Name : Cat
Service Tel : （309）578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
The Cat C4.4 ACERT Tier 4 Final/Stage IV engine burns up to 22% less fuel than the Tier 3/Stage IIIA engine it replaces, and it can run on biodiesel up to B20.
Maximum lift is 12 650 kg (27,100 lb) at 4.5 m (15 ft) out front at ground level with no limitation – up to 8% more lift than the model it replaces.
High-ambient cooling capability lets you work in extreme heat.
The machine can work in altitude up to altitude capability up to 3000 m (9,840 ft) with no engine derating.
Compact radius helps you work in tight spaces.
Demolition work is easy with a Cat hammer, grapple, shear, or multi‑processor.
Utility and finishing work are fast and flawless with a Cat compactor, thumb, finishing bucket or tilt bucket.
Couplers let you swap between attachments in seconds without leaving the cab.
See the whole attachment line for your machine at www.cat.com/attachments.
The full-size roll-over protective structure (ROPS) certified cab is quiet and comfortable.
Automatic climate control helps maintain consistent cab temperature.
Joystick consoles and armrests are adjustable.
Seats are adjustable and feature air suspension and heated and cooled options.
The LCD monitor is easy to navigate and programmable in 44 languages.
Cat Grade Control Depth and Slope helps operators work more productively and accurately with less rework.
Product Link™/VisionLink® connects owners to their equipment, providing access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes.
Most routine service points are at ground level.
Filters are consolidated in the pump compartment for added convenience.
Wide service doors and a two-piece engine hood with gas cylinder assist allow for easy access.
An electric fuel priming pump speeds up starts and fuel system maintenance.
The roll-over protective structure (ROPS) cab is safe, comfortable, and as quiet as today's top on-road trucks.
Handrails, anti-skid plating, and countersunk bolts reduce slipping and tripping.
Four mirrors and a rearview camera enhance visibility to help make operators more effective and efficient.
A full-length firewall separates the pump and engine compartments.
A ground-level fuel cutoff switch shuts down the engine in case of emergency.
Picture yourself behind the joysticks of one of the world's finest compact radius excavators, the Cat® 325F L. This machine features a highly efficient U.S. EPA Tier 4 Final/EU Stage IV C4.4 ACERT™ engine that's miserly on fuel paired with a state-of-the-art hydraulic system that's responsive to your every command.
Units:
| Engine Model | Cat C4.4 ACERT | Cat C4.4 ACERT |
| Net Flywheel Power | 161.0 HP | 120.0 kW |
| Bore | 4.0 in | 105.0 mm |
| Stroke | 5.0 in | 127.0 mm |
| Displacement | 269.0 in³ | 4.4 l |
| Gross Power - SAE J1995 | 164.0 HP | 122.0 kW |
| Net Power - SAE J1349 | 161.0 HP | 120.0 kW |
| Operating Weight | 57100.0 lb | 25900.0 kg |
| Note | *Long undercarriage, Reach Boom, R2.9 (9'6") Stick, 1.19 m3 (1.56 yd3) Bucket and 790 mm (31 in) Triple Grouser Shoes. | *Long undercarriage, Reach Boom, R2.9 (9'6") Stick, 1.19 m3 (1.56 yd3) Bucket and 790 mm (31 in) Triple Grouser Shoes. |
| Operating Weight* | 57100.0 lb | 25900.0 kg |
| Fuel Tank Capacity | 86.6 gal (US) | 328.0 l |
| Cooling System | 7.9 gal (US) | 30.0 l |
| Engine Oil | 6.6 gal (US) | 25.0 l |
| Swing Drive | 2.1 gal (US) | 8.0 l |
| Final Drive - Each | 2.1 gal (US) | 8.0 l |
| Hydraulic System - Including Tank | 74.0 gal (US) | 280.0 l |
| Hydraulic Tank | 33.8 gal (US) | 128.0 l |
| DEF Tank Capacity | 4.9 gal (US) | 19.0 l |
| Swing Speed | 11.2 r/min | 11.2 r/min |
| Swing Torque | 45612.0 ft·lbf | 62.0 kN·m |
| Maximum Drawbar Pull | 45591.0 lbf | 203.0 kN |
| Maximum Travel Speed | 3.5 mile/h | 5.6 km/h |
| Main System - Maximum Flow - Total | 429 L/min [214.4 × 2 pumps] (113 gal/min [56.6 × 2 pumps]) | 429 L/min [214.4 × 2 pumps] (113 gal/min [56.6 × 2 pumps]) |
| Maximum Pressure - Equipment - Heavy Lift | 5510.0 psi | 38000.0 kPa |
| Maximum Pressure - Equipment - Normal | 5075.0 psi | 35000.0 kPa |
| Maximum Pressure - Swing | 3698.0 psi | 25500.0 kPa |
| Maximum Pressure - Travel | 5075.0 psi | 35000.0 kPa |
| Pilot System - Maximum Flow | 4.8 gal/min | 18.0 l/min |
| Pilot System - Maximum Pressure | 595.0 psi | 4100.0 kPa |
| ISO 6395 - Spectator Noise | 99 dB(A)* | 99 dB(A)* |
| ISO 6396 - Operator Noise (Closed) | 69.0 dB(A) | 69.0 dB(A) |
| Note | *EU Certified Data. | *EU Certified Data. |
| Length - Center of Rollers | 12.0 ft | 3650.0 mm |
| Track Length | 14.67 ft | 4460.0 mm |
| Shipping Height | 10.42 ft | 3180.0 mm |
| Shipping Length | 29.25 ft | 8920.0 mm |
| Tail Swing Radius | 5.67 ft | 1720.0 mm |
| Counterweight Clearance | 3.17 ft | 960.0 mm |
| Ground Clearance | 1.5 ft | 450.0 mm |
| Handrail Height | 10.42 ft | 3180.0 mm |
| Note | *With 1.19 m3 (1.56 yd3) HD Bucket | *With 1.19 m3 (1.56 yd3) HD Bucket |
| Track Gauge | 7.83 ft | 2380.0 mm |
| Track Gauge - 790 mm (31 in) Shoes | 10.42 ft | 3170.0 mm |
| Transport Width - 790 mm (31 in) Shoes | 9.75 ft | 2980.0 mm |
| Maximum Cutting Height | 35.92 ft | 10960.0 mm |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 21.42 ft | 6540.0 mm |
| Maximum Digging Depth | 22.0 ft | 6710.0 mm |
| Maximum Height - To Bucket Teeth at Highest Arc | 35.92 ft | 10960.0 mm |
| Maximum Loading Height | 25.92 ft | 7890.0 mm |
| Maximum Reach - Ground Line | 32.08 ft | 9790.0 mm |
| Maximum Vertical Wall Digging Depth | 16.42 ft | 5000.0 mm |
| Minimum Loading Height | 9.75 ft | 2960.0 mm |
| Note | *With 1.19 m3 (1.56 yd3) HD Bucket | *With 1.19 m3 (1.56 yd3) HD Bucket |
